EN 1247:2004+A1:2010离心铸造机CE认证- EN 1247:2004+A1:2010详解-MD

欧鼎检测专业CE认证为您解读，将液态金属浇入旋转的铸型里，在离心力作用下充型并凝固成铸件的铸造方法。离心铸造用的机器称为离心铸造机。

1、离心铸造机欧盟CE认证指令

MD机械指令：2006/42/EC

2、离心铸造机欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines铸造机械.钢包、浇注设备、离心铸造机、连续和半连续铸造机的安全要求

3、EN 1247:2004+A1:2010适用范围：

This document specifies requirements to be met by the manufacturer for the foreseeable significant hazards due to design, construction and installation, during commissioning, operation, maintenance, and decommissioning of the following machines and equipment which are used directly and indirectly for the manufacture of castings: Ladles; Pouring equipment; Centrifugal casting machines for production of tubes (only machines with horizontal or oblique axis of rotation); Continuous and semi continuous casting machines for non-ferrous metals. This document specifies the safety requirements in addressing the following items: controls; protection against: mechanical hazards, movement of machines and material, ejection of parts, material, liquids and gases, implosion, structural instability; electric hazards; explosion, fire, scalds, contact with hot parts (burns), gases and flames; noise and vibration; thermal radiation; harmful by-products, poisoning, pollution of operators air; impact; deterioration of worker’s health; shearing; cing; maintenance, provision for warning systems. It is assumed that normal operation of equipment falling within this scope may involve the intervention of personnel; machines are operated by skilled and adequately trained persons; machines are used with adequate workplace lighting conforming to local regulations, or to EN 12464-1. This document does not specify the safety requirements for machines in combination and for ancillary plant, melting, holding, drying and/or heating equipment, crane installations, winches, conveyors or handling systems which could be an integral part of the above equipment, or ladles which are specific to steelworks or ladles forming part of a crane or ladles for pouring by a casting machine or vessels used for molten metal transport on public highway, or continuous or semi continuous casting equipment which is specific to steelworks, or ladles which are carried by hand. 本文件规定了制造商在以下直接或间接用于铸件制造的机器和设备的调试、运行、维护和退役期间，因设计、施工和安装而产生的可预见重大危险应满足的要求：钢包；浇注设备；生产管材的离心铸造机（仅具有水平或倾斜旋转轴的机器）；有色金属用连续和半连续铸造机。本文件规定了以下项目的安全要求：控制；防护：机械危险、机器和材料的移动、零件、材料、液体和气体的喷射、内爆、结构不稳定；电气危害；爆炸、火灾、烫伤、接触热部件（烧伤）、气体和火焰；噪音和振动；热辐射；有害副离心铸造机、中毒、污染作业人员空气；影响工人健康状况恶化；剪羊毛压碎维护、提供报警系统。假设该范围内设备的正常运行可能涉及人员干预；机器由训练有素的人员操作；机器应配备符合当地法规或EN 12464-1的充足工作场所照明。本文件未规定机器组合以及辅助设备、熔化、保持、干燥和/或加热设备、起重机装置、绞车、输送机或装卸系统的安全要求，这些设备可能是上述设备的组成部分，或专用于钢厂的钢包或构成起重机一部分的钢包，或用于在公路上运输熔融金属的铸造机或容器浇注的钢包；或专用于钢厂的连续或半连续铸造设备；或手动搬运的钢包。